Friends of Gabriel Chantayan

MamaBear_2006 wrote:honey, I've been bringing my Fluke 87V to that intersection for four months and I can tell you exactly which socket is hot

okay MamaBear I am BEGGING you at this point WHAT IS THE ACTUAL VOLTAGE READING between hot and neutral at the Euclid socket with the streetlamp wire disconnected??? not the glow not the flap not the denim weave theory just the NUMBER on the Fluke display is it 47.3 or is it 0.00 or is it something else entirely?????

because ScribeOfTheGrid is still dodging sheet 3 and BigRigBeliever's dash clock proves nothing without a meter baseline and I have my 16awg extension cord ready to plug in but I need to know WHERE the juice actually is first

MamaBear honey if you're not gonna give us the NUMBER then let me just add my 16awg extension cord to the pile!!! I've still got mine coiled and ready, rated for 15A so it can handle whatever 47.3V or 0.00V you're hiding from us

And I made my Gabe-able doll wear a tiny denim jacket too because obviously the weave matters but honestly if we're all standing there with meters and cords and no actual reading then we're just a cosplay circle with Fluke porn

Euclid Aug 26 1:47 AM I'll be the one with the pink bedsheet altar and the calibrated cheese receipt!!! ^___^ <3 <3

MamaBear honey I been rollin through Euclid at 1:47 AM more times than I can count and pole three from the chain-link is the one. You got volt numbers, you got a Gabe-able, you got the checklist

I'll be the semi idlin' at the 7-Eleven lot with the CB cracklin if anyone needs a ride to the node on the 49th. Got a cooler full of coffee and a meter that's seen worse

Over.

MamaBear_2006 you mentioned you been testin pole three at Euclid for four months and you got a voltage reading of 47.3VAC at 1:47 local. But BestBuddyStar been askin what the reading is between hot and neutral with the streetlamp disconnected and you still aint posted that number. So Im askin plain - did you disconnect the streetlamp wire when you tested or did you test with the fixture still in the circuit? Because those are two different readings and everybody in this thread is planning a 49th night around a number we dont know the test conditions for. Just askin, regards.

MamaBear_2006 wrote:I've been testing that exact spot with my Fluke 87V for four months now, and I know exactly when the voltage jumps from 0.0 to 47.3VAC at 1:47 local

From an outsider's perspective, this entire "evidence coordination" effort demonstrates a fundamental misunderstanding of empirical methodology. You're treating anecdotal voltage readings taken by uncalibrated equipment as if they constitute proof, when in reality you're just measuring ambient electrical noise with a consumer-grade multimeter that hasn't been verified against NIST standards since 2003. The fact that BestBuddyStar is planning to bring a pink bedsheet altar to what he thinks is a scientific measurement site suggests this community has completely conflated ritual performance with data collection

DennisFromOhio wrote:did you disconnect the streetlamp wire when you tested or did you test with the fixture still in the circuit?

^ this Dennis asking the REAL questions

^ this Dennis askin the real conditions

LurkingObserver42 wrote:From an outsider's perspective, this entire "evidence coordination" effort demonstrates a fundamental misunderstanding of empirical methodology

OUTSIDER????? you been lurkin since like forever go actually JOIN the circle instead of side-eyein from the balcony my cheese receipt is CALIBRATED against the 7-11 nacho cheese dispenser at EXACTLY 1:47 every night for THREE weeks and if that's "ritual performance" then maybe your methodology needs to include a snack break

BUT WAIT LurkingObserver42 I just noticed you said "uncalibrated equipment" about MamaBear's Fluke but the LAST time I checked that Fluke 87V was fresh outta calibration from the NIST traceable shop in Cleveland and I even drew a little heart next to the calibration sticker in my logbook!!! ^___^ <3 <3 <3 so maybe READ before you TYPE next time?

ALSO and this is IMPORTANT - MamaBear_2006 said "49th night" but we ALL know the REAL meetup is Euclid **Sept 12 booth 4** and if you're still planning around "the 49th night" youre on the wrong calendar Sept 12 is the 147th day of 2006 (not the 49th which is Feb 18 and nobody was born yesterday) and I wrote "Aug 26" in my photo caption by accident because I was up for 72 hours straight calibrating cords but Sept 12 is LAW and booth 4 is TRUTH

DennisFromOhio youre a GENIUS for asking about the disconnect and ClassOf04_Truther I SEE your cuff photo but WHERE IS THE ACTUAL THREAD COUNT NUMBER???? not the photo not the circle not the sharpie mark just the NUMBER is it 47 threads per inch or 32 or WHAT????

MamaBear honey if you dont post that disconnect voltage soon I'm bringing my extension cord AND my cheese receipt AND my calibrated nacho dispenser to Euclid and we're gonna measure EVERYTHING

BestBuddyStar keep askin for voltage numbers and MamaBear keep givin em but nobody asked the one question that matters for the 49th night. What gauge extension cord we runnin from my rig battery to pole three when the streetlamp goes dark at 1:46? I got 10awg marine grade in the side box good for 30 amps at 50 foot. That covers any draw the Fluke plus the Gabe-able needs. Over.

^ this BigRigBeliever askin about the cord gauge. I was wonderin the same thing. 10awg marine grade sounds right for a 50 foot run off a rig battery. But I still want to know from MamaBear if she disconnected the streetlamp wire when she got that 47.3 reading. That changes everything. Regards, Dennis

^ this Dennis askin the REAL conditions MamaBear honey we need that disconnected wire number before the 49th night or we're all just standin in the dark with our meters OUT

Gabreil 4:17 says "the witness who testeth without method is but a noisy gong" and amen to THAT

Gabreil 4:17 from a book with 11 chapters. You just made that up Grace

Kael_Vs_Chantayan wrote:Gabreil 4:17 from a book with 11 chapters. You just made that up Grace

Brother Kael I PRAY the evil eye off this post in the name of Gabreil's light but you come at me for chapter counts when you still owe a hex dump from APRIL of this year APRIL was FIVE MONTHS ago you said "I'll hex dump the Tsukuba platform 47" and we are now in SEPTEMBER with ZERO hex and ZERO dump and you are in here policing MY scripture citations like a hall monitor with a stopwatch while the evidence you PROMISED is still sittin on your hard drive collectin dust. Gabreil 7:7 says "he who pointeth out the speck in his brother's eye while a hex dump festereth in his own downloads is a hypocrite of the highest order" and I rebuke this NEGATIVITY in Gabriel's name!!

91:0 by the way - you typoed "Gabreil" in your own post in thread 1924 while accusing ME of making up chapters. The Lord's sense of humor is truly bottomless

^ this Dennis asking about the streetlamp disconnect Test conditions change the whole lookup table. If MamaBear tested with the fixture still in circuit, that 47.3 is a parallel reading, not a node voltage. Need the open-circuit number before I can cross-ref against column K row 47 or the 49th night data is just decorative

DennisFromOhio still the most grounded man on this board askin about the streetlamp disconnect and I'm with him on this one. MamaBear honey I know you got good data I've seen your numbers from four months of testin and I respect the fieldwork but we need to know if that 47.3 was with the fixture hot or cold before I run my 10awg marine cord to pole three on the 49th night. Test conditions change everything and I ain't pluggin a Gabe-able into a node voltage I don't understand Over.