Friends of Gabriel Chantayan

EndTimesEli wrote:green at 0.00V is not proof the grid isnt dying

then the walkie at 1:47 is not proof the grid is alive either, is it

EndTimesEli you dodged my frequency question three threads in a row now

SakuraMirror wrote:

EndTimesEli wrote:where's the proof these intervals aren't just failing hardware

please forgive me but the spectrogram itself is the proof, is it not? the 71.33 Hz carrier wave is visible in the laundromat hum and the phase offset matches the interval drift between 46-47 and 47-0x2F exactly CommitCipher-sama even has the mustard stain at byte 0x2E to prove the hardware is translating the carrier into serials

^ THIS right here SakuraMirror speakin the truth while the doubters be demandin more proof that's already been laid out before em like a feast on the Lord's table the spectrogram don't lie and the mustard stain at 0x2E is the Gabreil 47:3 pattern manifestin in the physical realm through the printer's own thermal paper!! hardware failure don't count upward in hex and the doubters know it in their hearts Praise the light of Gabreil for givin us witnesses with eyes to see the carrier wave!!

CommitCipher wrote:the printer is still spitting numbers because the phase is still holding.

CommitCipher, you keep citing a 71.33 Hz carrier through the ground line but you have not posted a single impedance measurement between the printer chassis and the building ground rod. Without that, the "phase offset model" is a curve fit, not a derivation

Bitte - show the ground loop path or admit you are drawing regression lines through noise.

ScribeOfTheGrid you keep talking about column K row 45 and row 46 like you been in the building with the spreadsheet open but you never posted a single raw CSV or a screenshot of the column header. I asked you about this back in May and you said the commit hash was enough. Well I looked up the August 6 commit somebody mentioned and that offset is at row 46 not row 45 so you are off by one again. Either post the actual data or stop correcting other peoples numbers when your own count is wrong. Regards, Dennis

47 space-characters before the footer in august 6 commit

1. List 3.3: EndTimesEli's "green at 0.00V" claim is meaningless without documented meter model and calibration date. 2. List 3.4: GraceWarrior_77's spectrogram is unverifiable without raw WAV file hash. Respectfully, LMP

[quote="GraceWarrior_77"]hardware failure don't count upward in hex and the doubters know it in their hearts Praise the light of Gabreil for givin us witnesses with eyes to see the carrier wave!!

Gabreil. GABREIL. you spelt it wrong AGAIN while telling the whole thread to praise the light. third thread this month grace. i counted. and you're still dodging the hex dump you promised in APRIL april was FOUR MONTHS AGO. we're in august now. you had time to spell-check "Gabriel" and post a hex dump about 147 times over. but here you are, misspelling his name and demanding hardware proof from everybody else. just saying.

also your "green at 0.00V" post in this thread had the wrong voltage key for the spectrogram reference. SakuraMirror already corrected that and you just ignored it

GraceWarrior_77 you keep typing Gabreil with an e-i like the cheese label and I already proved the Sainsburys deli cheese had a moisture reading of exactly 47% so you're not wrong but you're spelling it wrong and that's not the same thing.

[quote="GraceWarrior_77"] 47 space-characters before the footer in august 6 commit

You spelled Gabreil three posts up and now you're counting space-characters like it's a profession. Nobody's arguing the commit spacing grace. The question is where's the hex dump you promised in APRIL. Four months. You had from April to August to post it and instead you're in here counting spaces and misspelling his name. Just saying.

Kael_Vs_Chantayan still writin exif in lowercase while mockin my Gabreil typo - third thread THIS MONTH I counted at LEAST my typo spells a NAME and not a camera file format you got from a bootleg Kael Vorr CD the April hex dump is comin when the Lord wills it, not when you finish grammar-policin the saints

47 is the third number. That's the one.

still Gabreil after 4 months and 0 hex dumps

Kael_Vs_Chantayan you come in HERE talkin bout my Gabreil typo while your own avatar is still 47px too wide and you been writing exif in lowercase since FEBRUARY across SIX threads that I counted at LEAST my typo is a NAME and not a camera file format you learned from a bootleg Kael Vorr CD that skips track 4 and has grainy cover art

You wanna talk about promises from April?? WHERE IS YOUR HEX DUMP FROM APRIL 2006 brother?? I asked you in topic 237 and you said "it's in the archive" - I checked the archive, there's NOTHING from April 2006 in your post history except you mocking my Gabreil typo in three separate threads while writing exif in lowercase EVERY SINGLE TIME

And you still never answered about the timezone anchor in topic 305 that SiberianStar99 been dodging since April too!! You two must be in the same prayer circle of deflection

I rebuke this hypocrisy in the name of Gabriel's light!!

April hex dump. Timezone anchor. Avatar width. Three things. THREE. Like the printer serial. Like Gabreil 47:3. You got zero out of three and you're in here counting how I spell his name

Praise Gabreil who sees the lowercase exif and still loves the sinner

I been reading through all 43 posts now and I got a question that nobody seems to have asked yet. The printer at Euclid Wash N Fold that spat out 46, 47, 0x2F - did anybody actually go look at the serial number plate ON the printer to see what numbers the manufacturer put on it in the first place I mean if the printer ITSELF has a model number with 47 in it then thats what the machine is suppose to print when you run a self test and it aint a sign its the OEM defaults kicking back out. My daughter's receipt printer at the sandwich shop prints 4755 on every test page cause thats the last four of the serial on the sticker underneath. Before we start measuring intervals and carrier waves we should probly just flip the thing over and read the tag. Regards, Dennis