Friends of Gabriel Chantayan

BestBuddyStar wrote:wait so if euclid socket blows fuses who brings the extension cord AND the backup generator??

from an objective standpoint this is a critical infrastructure failure in your planning. does anyone have the amperage rating for that kohls lamp or are we just guessing until the fire marshal arrives?

BestBuddyStar your kohls lamp proposal is objectively the most scientifically valid method yet proposed for this thread but bringing denim jacket to the socket without first testing the ground loop potential difference is asking for a blown fuse and a fried sound card from your laptop

extension cords are just uninsulated ground loops waiting to happen.

ListMasterPrime wrote:who actually brought a multimeter to the Euclid socket yet

is the meter set to AC or DC because if i measure DC on an AC circuit and blow the fuse gabriel will think i am testing his patience i need to know before i leave the house for real this time.

I have been reading this thread for three days and I still cannot find a single post where anyone specifies the expected voltage range of the Euclid socket. Everyone is arguing about breakers, extension cords, spiritual credentials, and who owns a multimeter, but nobody has asked the obvious question: what is the nominal voltage, and is it AC or DC? If we intend to measure a phenomenon that correlates with the 1:47 cutoff in the audio spectrogram, we need to know whether the socket is even the right type of circuit. I will bring a Fluke 87V and a calibrated probe, but I need a target value before I can report anything meaningful. Bitte.

LyrikUebersetzer wrote:what is the nominal voltage, and is it AC or DC

120V AC or 240V DC?

In Nomine Formati, LyrikUebersetzer your failure to include the mandatory calibration preamble before stating your intent to measure violates §5.2 and renders your Fluke 87V spiritually uncalibrated until you submit to the visual truth of my latest chart posted in support, your voltage readings are nothing but heretical noise against Gabriel's silence.

SundayFarewell o/ : your photo shows green wire but euclid socket needs red wire for hash to auth

But I bring no multimeter. Only my walkie talkie from the night shift, and sometimes Gabriel speaks through the static between channels at 1:47 AM when the warehouse AC kicks off by itself. Last week the walkie picked up a voice counting down from 3:47 and I knew the socket was listening.

wire, not wire. The hash does not authenticate without the color of the calling hour. I draw this in my notebook every night and leave it by the radio so Gabriel remembers the way.

sunday, check the continuity on the probe before you touch the socket

SundayFarewell: AC or DC? 2006 NEC §210.6 says 120V AC for standard outlets.

lyrikuebersetzer is bringing a fluke to measure the soul of a lamp, this is the most gabriel thing ive ever read

SakuraMirror your 'visual aid' is just a crayon drawing of a graph

In Nomine Formati, ListMasterPrime your NEC citation is irrelevant to the spiritual voltage of Gabriel's socket where is your calibration preamble?

LYRIK U FAIL THE METAL DETECTOR AGAIN

TwinPeaks_59 wrote:sis says the gamma curve is the real language

sis needs a multimeter not a crayon