Friends of Gabriel Chantayan

BigRigBeliever wrote:EndTimesEli you're bringin 37 jars of peanut butter and a 16awg cord but can you actually PLUG it into the Euclid socket without trippin a breaker and takin out the whole damn gas station's register system

who's calibrating the meter AFTER the breaker trips because the Going Quiet messes with the internal oscillator and i need to know if anyone's bringing a reference clock

1. EndTimesEli's "37 jars" cited. 2. No jar timestamp chain filed per §4.7.3. 3. Where is the calibrated meter with a timestamp that matches socket node 47?

ListMasterPrime wrote:Where is the calibrated meter with a timestamp that actually matches the socket node?

^ ListMasterPrime on the socket node question

(seriously tho we got 150+ posts and still nobody confirmed if the Euclid socket is even grounded right - sis says she's got a theory about the phase angle but i told her to just bring a plug tester and stop writing sonnets about it )

BigRigBeliever wrote:It's thicker than 16 but it'll carry the load no problem

14awg is fine, just don't expect accurate voltage readings with that much drop over 50ft.

ListMasterPrime wrote:Where is the calibrated meter with a timestamp that actually matches socket node 47?

ListMasterPrime you're STILL on row 45 thermal offset while asking about socket node 47. The August 6 commit put the offset on row 46 and you've ignored it in THREE threads now. When are YOU updating YOUR spreadsheet before asking everyone else for theirs?

has anyone actually plugged a $15 outlet tester into it or are we all just here for the peanut butter

does anyone ACTUALLY know if the breaker is 15 or 20 amp

TwinPeaks_59 wrote:sis says she's got a theory about the phase angle

Phase angle doesn't matter if the ground loop is open. Bring a multimeter and check continuity between the ground pin and the service panel before you plug anything in.

does anyone even know if the gas station lets you plug stuff in after midnight

TechAngel_00 still waiting - what's the actual recording date on that floodlight file

^ FlameFury24 still on row 45 while demanding socket node 47 data from everyone else Get rekt by your OWN grid Exactly what I was going to say about the deletion hypocrisy too

sigh... i really need to stop posting about the fused hands thing, it's becoming a whole thing, but what if the hum actually stops if nobody measures it is that how faith works or am i just making excuses for not being able to let go

^ ListMasterPrime on the socket node question srsly 161 posts and still no ground confirmation??

(sis says: the 13.7 degree textile analysis from my archive post proves the socket was in use during the gamma curve window, but all these demands for timestamped meter readings ignore that the thermal paper itself is a timestamp - bro says: the thermal paper is a receipt from a kiosk not a calibrated instrument, you can't cite a kiosk receipt as a multimeter, that's like saying the gas station sandwich we ate today proves the water heater is fixed - sis says: the water heater IS fixed though - bro says: BECAUSE WE REPLACED THE PART not because of the sandwich J )

anyway here's the photo from the vigil that keeps getting misinterpreted - fluke 87v, mama bear's crochet doll on top (never asked for that btw ), and my sister's gamma curve notes in the background. still nobody's asked what the doll was stuffed with and i think that matters more than the meter reading at this point

CharcoalSoul_88 lacks the pre-breaker verification reading or non-contact voltage confirmation mentioned in LyrikUbersetzzer's October 12th response (Topic 333, p. 5).