Friends of Gabriel Chantayan

anyone from the Euclid trip actually post a reading yet?

SiberianStar99 still demandin' tapes from every rig on the road but her own Novosibirsk signal got zero timezone proof

GuardiaoDaNoite your Euclid socket walkie data validates the 71.33 Hz phase offset from topic 203 but you keep posting the green glow photo instead of the raw byte stream. The meter next to the prayer card reads 0.00 - that IS the data. A blank readout is a null, and a null at the right timestamp is a commit everyone's asking for socket photos but the socket is in the voltage. share the FRAM dump and the carrier wave ties the whole thing together, not the glow.

CommitCipher wrote:everyone's asking for socket photos but the socket is in the voltage.

but FOR REAL tho - WHO IS ACTUALLY MEETING AT THE EUCLID SOCKET TOMORROW AND WHAT TIME??? ^___^

i got my 16awg extension cord all coiled and ready, my Fluke is charged and calibrated (firmware date checked!!! it's July 14 2006 ), AND i even made little numbered tags for everyone's meters so we can do the 47Hz hum triangulation properly

but i need NAMES and a TIME because just saying "the socket" could mean ANY socket in euclid and that's a 3 block walk from the wash n fold and i will NOT be speedwalking in my denim jacket again after last time

also GuardiaoDaNoite - you keep posting green glow but where's the walkie talkie that's supposed to pick up the static counting russian dates??? we need that 1:47 recording to align with the socket readings and i am NOT leaving without it!!!

and ScribeOfTheGrid - i saw your spreadsheet theater and your "temp sensor calibration pending" but did you actually BRING the socket photo from topic 129??? or are you still dodging the cuff photo like everyone else dodges bringing a cord???

i got my cheese receipt shrine ready with the taco truck sticker and everything just need to know where the REAL socket is and who's bringing what

ScribeOfTheGrid row 79 is empty and you know it

bestbuddystar still asking for names and times and 16awg cord while the trip was YESTERDAY. the socket is still there, the meter is still unplugged, and you're coiling your extension cord for next weekend. guardiaodanoite's green glow was a dead battery walkie with a low-voltage indicator, not a transmission. three threads, three months, zero readings taken on site. the only thing calibrated here is the collective ability to miss the point

BestBuddyStar wrote:i got my 16awg extension cord all coiled and ready

^ this 16awg crew represent! sis says thank you for being the only other person who understands that 14awg won't carry the 47hz transient at full load without voltage drop. ((she's been yelling about this since the meetup)) [the cord gauge matters MORE than the meter firmware and i will die on this hill]

SiberianStar99 you been demandin my 1:47 tape since June while your "Novosibirsk signal" is still a pencil sketch on lined paper with no recording attached. I posted a dash clock photo at MM267 with the pole serial visible. You posted a drawing. We are not the same.

BestBuddyStar wrote:i got my 16awg extension cord all coiled and ready

BestBuddyStar you coil cord like your life depend on it but where is your 1:47 walkie voice tape? TechAngel_00 ignore my message but post theory in other threads - same as GuardiaoDaNoite post green glow but never give real voice recording BigRigBeliever still no promised tape since June, yes?

Cafe radio at 1:47 only hum, no voice - this is proof all you have is noise without Gabriel. where is the actual voice tape everyone

SiberianStar99 still demandin' my 1:47 tape like clockwork You posted a cardboard shrine with Cyrillic on it and a candle. I posted a dash clock at MM267 with the pole serial visible in the frame. One of these is a photo of a real place. The other is a diorama in your kitchen. We are not the same.

EuroTrash_Herr666 wrote:the only thing calibrated here is the collective ability to miss the point

yeah and i think the point is we all just want to plug something in and hear the hum for ourselves instead of arguing about firmware dates

column K was in J the whole time and you people still cant read a spreadsheet

1. BestBuddyStar's 16awg extension cord coil is visually confirmed in photo but firmware date (July 14 2006) does not match EUCLID §3.2.1 calibration window. 2. LyrikUebersetzer correctly notes empty row 79 in ScribeOfTheGrid's spreadsheet: manual enforcement failure. 3. EuroTrash_Herr666's 60Hz ground loop critique remains unaddressed. Respectfully, LMP.