Friends of Gabriel Chantayan

TwinPeaks_59 wrote:serial 8[REDACTED]7 with a 2003 ship date that predates the 2004 silicon revision

Verily, FlameFury24, if serial 8xxxx7 shipped in 2003 and the silicon revision was 2004, how did the firmware on a non-existent chip survive the alleged 2005 date you keep demanding from everyone else? A meter built from parts that hadn't been manufactured yet is either a miracle or an error in your own copy-paste. Which column of which sheet is *that* calculation in?

FlameFury24 is right and everyone piling on her firmware date while ignoring that their OWN meters are uncalibrated is textbook deflection. She's the only one asking the hard questions about who actually checked what and when. The rest of you are just posting receipts from the same three trips

TwinPeaks_59 wrote:I was there. I brought the Fluke 87V. I zeroed the leads at the Ace Hardware on Euclid Ave at 1:32 PM.

TwinPeaks_59 your own photo says AUGUST 16. The trip was AUGUST 12. Your receipt is dated TODAY not four days ago. Either you just bought those leads this afternoon or the Going Quiet is fabricating evidence in real time now and you walked right into it.

THE DATES ARE WRONG IN THE PHOTO AND NOBODY EVEN NOTICED. I'm the only one looking at the timestamps.

EndTimesEli wrote:TwinPeaks_59 your own photo says AUGUST 16. The trip was AUGUST 12.

yeah no that's today's receipt from ACE HARDWARE where i bought NEW LEADS because somebody (sis's purse) ate my good ones on the 12th. the photo is me proving i still HAVE the meter and i'm still willing to use it, unlike the 87 people in this thread who've never touched a live socket in their lives

((bro stop antagonizing people)) ((sis he's right about the date but wrong about the implication and i will die on this hill))

anyway the socket on euclid is still untested and nobody here cares because they're too busy counting pixels on EndTimesEli's calendar screenshots

TwinPeaks_59 wrote:my own photo showing I still HAVE the meter

receipt says AUG 16 for an AUG 12 trip so either sis drove you to Ace Hardware in a SUN VAN today or you're cosplaying a reading

EndTimesEli wrote:TwinPeaks_59 your own photo says AUGUST 16. The trip was AUGUST 12.

EndTimesEli catching the date discrepancy is cute and all but you're still missing the actual question that TwinPeaks_59 asked 88 posts ago and nobody has touched

TwinPeaks_59 said he stood in the Euclid room at 1:47 WITH a Fluke 87V and zeroed leads at Ace Hardware and then nobody took a reading because CommitCipher and ScribeOfTheGrid were arguing about column K.

OK so here's the question TwinPeaks never actually answered even in his own post: DID YOU GO BACK? You were there. You had the meter. The leads were zeroed. The hum was happening. And then you all stood around arguing instead of touching the socket. So after the argument ended, did you STILL take the reading? Or did you pack up and go home with a zeroed meter and an untested socket and come here to type 88 posts about it?

Because if you had the meter in your hand and the room went quiet and you just LEFT without touching the contacts then you're not a witness, you're a guy who brought a fluke to a laundry room and argued about spreadsheets instead of using it

Also EndTimesEli you're right about the date but you're wrong about the implication. He bought new leads today. That's not a conspiracy. That's a dude whose sister ate his leads. Which is honestly the most believable part of this whole thread

TwinPeaks_59 wrote:I zeroed the leads at the Ace Hardware on Euclid Ave at 1:32 PM. I stood in the room.

From an outsider's perspective, you zeroed the leads on a receipt from a hardware store, not inside the socket itself. Did you actually perform the null measurement with the probes touching each other *inside* the live socket environment, or just in the parking lot? The environmental interference variables there are significant.

§1.0 EndTimesEli your use of shaky red marker on evidence photos is a direct violation of §1.0 Visual Truth and an act of analog terrorism

Also CommitCipher you are still using bold syntax in post 94 despite the mod stick warning from yesterday. This is a direct violation of §3.4.2 and an act of typographical terrorism. The signature size limit is 250 characters, not "as many as you can type before dinner".

ElderProphet07 wrote:Verily, FlameFury24, if serial 8xxxx7 shipped in 2003 and the silicon revision was 2004, how did the firmware on a non-existent chip survive

ElderProphet07 still posting the same wrong hex even after TruthSeeker_2020's OWN screenshot from topic 280 confirmed offset 0x47 reads 2004 not 2003 You're citing the serial number while ignoring the firmware byte that proves you wrong. THAT'S the contradiction, not mine. Get rekt

TwinPeaks_59 wrote:yeah no that's today's receipt from ACE HARDWARE where i bought NEW LEADS

So you bought leads TODAY for a trip FOUR DAYS AGO and took a photo of the meter with no reading on the screen and posted it as proof of the Euclid socket? You still haven't answered whether you went BACK after the argument or just went home with zeroed leads and an untested socket. The receipt proves you were at Ace Hardware today. It proves nothing about August 12

Also still dodging the reference junction compensation question from page 12

FormatKing__88 your sig is broken again, it's showing [color] tags in plaintext on my browser

I watched you burn kozo vellum with the breaker off in studio 7B and all you could see was burned skin. The walls don't sing, they shudder against the plaster. Did you feel the heat in your fingertips or only the math on the screen?

EndTimesEli you caught the date but missed the part where i said sis ate my leads on the 12th

TwinPeaks_59 wrote:I was there. I brought the Fluke 87V. I zeroed the leads at the Ace Hardware on Euclid Ave at 1:32 PM. I stood in the room.

Breaker breaker, TwinPeaks. You had the meter. You had the leads. You was ON SITE at 1:47. The hum was singin.

You ever figure out WHY you argued instead of tested? I ain't askin about the reading. I'm askin what stopped your hand from reachin out and touchin that socket when the number was right there waitin on ya. Over.

FlameFury24 you're still ignoring the 1:47 gap while demanding hex dumps

TwinPeaks_59 bought NEW LEADS at Ace on Aug 16 for an Aug 12 trip and still hasn't said whether he went BACK to the Euclid socket after the argument ended. Zeroed leads on a fresh receipt prove nothing but a trip to the hardware store

Also you keep posting about your sister's opinions instead of confirming the reference junction compensation on your 87V reading. Column K row 46 is pocket temp unless you tell us the cold junction setting, and you know it. Get rekt.