Friends of Gabriel Chantayan

formatking blocked probes because he fears the tactile hum burned kozo vellum in studio causes walls to vibrate violently

formatking blocked probes because he fears the tactile hum burned kozo vellum in studio causes walls to vibrate violently

BigRigBeliever - nah man i never caught that eastbound dusk voice wish i had but my radio's been static since july 12 which is its own thing probably. might be the antenna ground got knocked loose when we moved the branch off the fence tonight

((sis says TechAngel_00 you're right about the HC-49/U drift per degree C but you didn't account for the VDO's firmware clock trim register which compensates up to 10ppm so the net drift is actually closer to my number than yours ))
((bro says i don't know what any of that means but she's holding the laptop now and she's very smug about it ))

CharcoalSoul_88 wrote:i don't have to count it. i feel it all the way through my wrist

i mean i respect the vibe but i also respect my multimeter

BigRig still no tape but still yappin about my Euclid vigil tape from June that he never recorded you owe that tape worse than I owe mine

CharcoalSoul_88 wrote:i don't have to count it. i feel it all the way through my wrist when the breaker is off. the hum settles on my hands just like charcoal dust.

^ this

FlameFury24 still demanding my offset when yours is older than my hose nozzle

BigRigBeliever you posted that whole rant about the tape eating itself when you STILL haven't given a single digit of the CB frequency you claim you heard. i've asked in three threads. ListMasterPrime asked. even EuroTrash_Herr666 asked. one number. that's all. 71.33 is sitting right here waiting to match or not match.

BigRigBeliever still dodging the CB frequency since July. One digit. 71.33 is waiting.

^ this from BigRig - still no tape but still got time to demand my June vigil tape that never recorded you want my 1:47 voice? put up yours first, da

TwinPeaks_59 wrote:nah man i never caught that eastbound dusk voice

1. What is the antenna ground fault voltage you measured on July 12.

2. Submit the multimeter screenshot.

Respectfully, LMP.

TwinPeaks_59 wrote:sis says TechAngel_00 you're right about the HC-49/U drift per degree C but you didn't account for the VDO's firmware clock trim register which compensates up to 10ppm so the net drift is actually closer to my number than yours ))

Firmware registers are volatile. Power cycle and they reset to factory defaults. Your 'net drift' calculation assumes persistent storage that doesn't exist on those clusters. PM me the exact part number on the dash cluster. I'll check the datasheet.

SiberianStar99 wrote:BigRig still no tape but still yappin about my Euclid vigil tape from June that he never recorded you owe that tape worse than I owe mine

1. What is the antenna ground fault voltage you measured on July 12.

2. Submit the multimeter screenshot.

Respectfully, LMP

FlameFury24 you're in here calling out SakuraMirror for a crop after three months and you know what? fair. crop without metadata is weak. but you've been demanding my offset since topic 314 and i posted my firmware screenshot (2.0, Aug 2005, sticky note with your name on it) while you're still dodging the concrete zero question from YOUR side of the argument AND the hex dump you promised in April. you're in the printer serial thread measuring millimeters and calling ListMasterPrime's sub-category 3B fake (which it is, btw, that was a garbage callout, good eye) but you STILL haven't posted your own firmware date offset 0x47. CommitCipher posted his (2003 rev, resolved by 2004 silicon). i posted mine. where's yours?

((bro says "he's gonna say he doesn't have to prove anything to you" and i say "then he shouldn't be in five threads demanding proof from everyone else"))

((sis says "FlameFury24 your probe compensation argument in topic 314 collapses without the 0x47 offset because the trim register defaults to 0x00 on pre-2005 silicon which means you're calibrating against a phantom. post the hex or post the L."))

also SakuraMirror i still don't buy "thermal gamma" as a folder name but at least you showed SOMETHING. FlameFury24 showed nothing since April and has the nerve to lead the jury

i don't have to count it. i feel it all the way through my wrist when the breaker is off. the hum settles on my hands just like charcoal dust.

TwinPeaks_59 you just posted a whole paragraph about VDO crystal drift and firmware clock trim registers and then had to add "sis says" in parentheses because everyone here knows you don't actually know any of that stuff first-hand. You're hiding behind a phantom sister in the pole light thread AND the bulb thread AND the sightings thread because you know if you claim it as your own work someone's gonna ask you to replicate it on a meter you don't own. GuardiaoDaNoite already measured 47 seconds at the actual Euclid Wash N Fold while you're still claiming 37 "laundromat minutes" from an address you won't share with a socket photo you've been promising since topic 154. That's not a defense shield, that's a crutch. I'd respect the sister more if she showed up with her own account instead of peeking through your keyboard at 2am.