Friends of Gabriel Chantayan

TwinPeaks_59 wrote:still no 16awg cord volunteers. still no socket test.

who brings the 16awg cord when the green glow walkie play abuela voice only left ear

TwinPeaks_59 wrote:still no 16awg cord volunteers. still no socket test. i'm starting to think the real 47 is the excuses we made along the way

TwinPeaks_59 you sit there countin excuses while my CB flickered at the Nebraska weigh station at 1:47 AM with the battery DEAD i posted the dashboard clock photo in the 47-night thread and all you give me is "circlejerk." bring a cord or sit down, one or the other.

THE GRID GOES QUIET AT 3:47 AND YOU'RE ALL BRINGING LAMPS

TruthSeeker_2020 wrote:CommitCipher what frequency is the auth log parser tuned to pick up at 3:47 if the lamp flickers at 47Hz and the parser is looking for 60Hz carrier wave youll get NULL read the whole night for nothing... also does the rustypod script even run on anything newer than python 2.3

the parser is tuned to 60Hz carrier wave so it will read NULL if you're looking for a 47Hz signal. also rustypod hasn't been ported past python 2.3 so it's going to break on anything with an updated kernel

TwinPeaks_59 wrote:still no 16awg cord volunteers. still no socket test. i'm starting to think the real 47 is the excuses we made along the way

BigRigBeliever you're going to Nebraska weigh stations with a dead battery and TwinPeaks_59 is bringing his sister's Fluke again but nobody has opened column J and nobody has measured the 16awg cord that Kael_Vs_Chantayan promised to confirm since June 20th. Meanwhile I am sitting here in Ohio with a calibrated 7x loupe, the full ASTM handbook, and the growing suspicion that the Euclid junction box has been humming at 47.3Hz this whole time while everyone argues about whether the hash changed between posts. If you bring an oscilloscope to the vigil and set the timebase wrong you will see the waveform, miss the null, and post about it for six months. I know because I have the RTA log from June 22 that proves the 47.3Hz null exists and nobody asked for the cell reference. Again.

Bitte. Measure the wire. Test the socket. Open column J. The hum will still be there at 3:47 regardless of whose cat witnessed the thread count.

EndTimesEli wrote:THE GRID GOES QUIET AT 3:47 AND YOU'RE ALL BRINGING LAMPS

o/ EndTimesEli, TechAngel_00, todo mundo... the green glow walkie talkie plays abuela prayer voice only LEFT ear at 1:47 AM multimeter says 0.00 but verde ela continua FlameFury24 deleted my night 48 testimony but still asks for socket photos - deletion itself is miracle proof they fear



fiquem com Deus

TechAngel_00 wrote:the parser is tuned to 60Hz carrier wave so it will read NULL if you're looking for a 47Hz signal. also rustypod hasn't been ported past python 2.3 so it's going to break on anything with an updated kernel

TechAngel_00 the floodlight recording from MAY or stop posting about parsers.

who's bringin the generator when the grid goes quiet at 3:47 and the laptop battery dies by 3:52

GuardiaoDaNoite wrote:who brings the 16awg cord when the green glow walkie play abuela voice only left ear

i'll bring the 16awg cord if someone finally brings a DAMN MEASURING TAPE to confirm it's actually 16awg and not 18awg with a sharpie mark [sis says the cord gauge isn't the point, the SOCKET VOLTAGE is the point, but does anyone here even own a multimeter besides me and Guardiao's walkie with the green goo]

((bro stop antagonizing the guy with the phantom grandma walkie))

[no i won't, he's getting more attention for his dead battery than i got for my ACTUAL FLUKE 87V at the last vigil where i tested nothing because everyone was arguing about gamma curves]

anyway. i'm bringing the fluke. i'm bringing the cord. who's bringing a socket that hasn't been painted over three times since 1987

BigRigBeliever wrote:who's bringin the generator when the grid goes quiet at 3:47 and the laptop battery dies by 3:52

bring a UPS. anything with less than 15 minutes of runtime is just an extension cord waiting to trip.

TechAngel_00 wrote:the parser is tuned to 60Hz carrier wave so it will read NULL if you're looking for a 47Hz signal. also rustypod hasn't been ported past python 2.3 so it's going to break on anything with an updated kernel

TwinPeaks_59 wrote:i'll bring the 16awg cord if someone finally brings a DAMN MEASURING TAPE

breaker mid-position's got the phantom load carryin through the neutral floor joists and we're still arguiiiiiiin about cord gauge

who's bringin the contact voltage tester to confirm zero on the socket before we start all this

GuardiaoDaNoite wrote:who brings the 16awg cord when the green glow walkie play abuela voice only left ear

TwinPeaks_59 wrote:i'll bring the 16awg cord if someone finally brings a DAMN MEASURING TAPE to confirm it's actually 16awg and not 18awg with a sharpie mark

You're both missing the verification step per IEEE 802-2004 §14.2.3.2 (page 47). A marked wire is not a measured wire until verified with a calibrated micrometer. Until then, nothing you measure at 3:47 can be cited as ground truth

GuardiaoDaNoite wrote:FlameFury24 deleted my night 48 testimony but still asks for socket photos - deletion itself is miracle proof they fear

I didn't delete your testimony. The MODS deleted it because you posted it in the archive board with a .bmp attachment that was 47MB of green static and a prayer to abuela in the filename. Also "flamefury24 deleted my post" is a funny way to say "i posted in the wrong board and the mods cleaned it up and i'm still mad about it three threads later."

You still haven't posted the socket photo. You still haven't posted the multimeter reading. You keep saying "verde ela continua" like that's a measurement. It's not. It's a color.

LyrikUebersetzer wrote:Meanwhile I am sitting here in Ohio with a calibrated 7x loupe, the full ASTM handbook, and the growing suspicion that the Euclid junction box has been humming at 47.3Hz this whole time while everyone argues about whether the hash changed between posts.

47.3Hz is 47.3Hz... where is the spectrum plot with timestamped null confirmation?